2021-06-16
„Ningbo Fangli Technology Co., Ltd.“, kaip gamintojas, turintis visą ekstruderio gamybos linijos įrangos rinkinį beveik 30 metų, mūsų PVC vamzdžių ekstruzeris priima pažangią lygiagrečią dviejų varžtų konstrukciją, kuri suteikia tvirtą garantiją PVC. Kokybės ir našumo kontrolė yra svarbi grandisvamzdis ekstruzijos gamybai, į vamzdžių ekstruzijos gamybos kokybės kontrolę reikėtų atkreipti dėmesį į pagrindinius dalykus.
1. Žaliavų ir formulės pasirinkimas
SG-5 derva, kurios klampumas (1,7 ~ 1,8)×10-3Pa•s is suitable for hard vamzdis production. Usually used as a three-salt base lead stabilizer, its thermal stability is good, and good lubricity of lead, barium soap and used to increase the lubricity. In the processing of hard vamzdiss, it is necessary to consider the internal lubrication to reduce the intermolecular force, so that the melt viscosity decreases for forming, and the external lubrication to prevent the melt and hot metal adhesion, so that the surface of the products is bright. Metal soaps yra generally used for internal lubrication, while low melting wax is used for external lubrication. Fillers mainly use calcium carbonate and barium (barite powder), calcium carbonate makes the surface performance of the vamzdis is good, barium can improve the formability, so that the vamzdis is easy to finalize, both can reduce costs, but remember that too much will affect the performance of the vamzdis, pressure vamzdis and corrosion resistant vamzdis is best not to add or add less fillers.
2. Pagrindiniai proceso taškai
UPVC vamzdelis yra suformuotas iš SG-5 PVC dervos ir pridedamas su stabilizatoriumi, tepalu, užpildu, pigmentu ir kt. Šios žaliavos minkomos pagal formulę po tinkamo apdorojimo. PVC vamzdis „Fanglii“ ekstruderis naudoja dviejų varžtų ekstruderį, kuris gali būti tiesiogiai suformuotas su milteliais.
In addition, two points should be paid attention to when the powder is used to extrude vamzdis directly without granulation: first, twin-screw extruder is the best choice for the direct extrusion of powder. Because the powder has less one mixing shear plasticization process compyrad with the granular material, the twin-screw extruder can strengthen the shear plasticization and achieve the expected effect; Second, because the granule is compacted than the powder, the heat and heat conduction is poor, so the processing temperature of the powder is about 10℃ žemesnė nei atitinkamos granulės apdorojimo temperatūra.
3. Pagrindiniai proceso būklės ir kontrolės taškai
Gamybos procese PVC yra tam tikra karščiui jautri medžiaga, todėl reikia griežtai kontroliuoti PVC liejimo temperatūrą. Ypač RPVC, nes jo apdorojimo temperatūra yra labai artima skilimo temperatūrai, todėl dėl netinkamo temperatūros reguliavimo jis dažnai suyra. Todėl ekstruzijos temperatūra turėtų būti nustatyta pagal formulę, ekstruderio charakteristikas, štampavimo struktūrą, varžto greitį, temperatūros matavimo taško padėtį, termometro paklaidą, temperatūros matavimo taško gylį ir kt.
Aukščiauyra trys pagrindiniai dalykai turėtų būti skirti kokybės kontrolei of UPVC vamzdis production. Tikimės suteikti jums tam tikrą pagalbą. Jei turite kokių nors poreikių, skambinkite mums, kad gautumėte išsamų tyrimą. Mes pateiksime jums profesionalius įrangos pirkimo pasiūlymus ir technines rekomendacijas.
https://www.fangliextru.com/upvc-pvc-uh-vamzdis-extrusion-equipment.html